Orange Pi Plus 2 memiliki port SATA, walaupun kecepatannya terbatas, Walaupun terbatas kalo untuk pengguna rumahan atau kantor kecil sudah lebih dari cukup sebagai media file sharing ;)
Koneksi SATA Orange Pi
Hubungkan hardisk SATA ke Orange Pi Plus 2 seperti gambar dibawah ini
Cek apakah hardisk ketedect atau ngga dengan dmesg
Hardisk 2.5″ 5400 RPM
dmesg | grep sd ### output [ 2.294555] sd 0:0:0:0: [sda] 976773164 512-byte logical blocks: (500 GB/465 GiB) [ 2.295543] sd 0:0:0:0: [sda] Write Protect is off [ 2.295559] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00 [ 2.296772] sd 0:0:0:0: [sda] No Caching mode page found [ 2.296787] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.300061] sd 0:0:0:0: [sda] No Caching mode page found [ 2.300076] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 2.330941] sda: sda1
Bila menggunakan hardisk 3.5″ 7200 RPM, hardisk baru terdeteksi sekitar 14 menit setelah start-up. Lihat log dmesg dibawah ini
[ 5.765211] systemd[1]: Started Load Kernel Modules. [ 5.814957] systemd[1]: Started LSB: Set keymap. [ 5.864839] systemd[1]: Started udev Coldplug all Devices. [ 5.866877] systemd[1]: Time has been changed [ 5.867194] systemd[1]: Starting Apply Kernel Variables... [ 5.951053] systemd[1]: Mounted Configuration File System. [ 5.951207] systemd[1]: Mounting FUSE Control File System... [ 6.000866] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.060838] systemd[1]: Starting Syslog Socket. [ 6.065711] systemd[1]: Listening on Syslog Socket. [ 6.065821] systemd[1]: Starting Journal Service... [ 6.195498] systemd[1]: Started Journal Service. [ 6.455505] systemd-udevd[179]: starting version 215 [ 6.739914] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x77) [ 6.739956] bmp085: probe of 0-0077 failed with error -70 [ 6.747637] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x48) [ 6.747849] sunxi_i2c_do_xfer()985 - [i2c0] incomplete xfer (status: 0x48, dev addr: 0x48) [ 7.290406] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 7.547065] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SS [ 8.984693] systemd-journald[178]: Received request to flush runtime journal from PID 1 [ 9.307068] gmac0: probed [ 9.340357] gmac0 gmac0: eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (gmac0-0:00) [ 10.489246] Registered IR keymap rc-empty [ 10.489947] rc0: sunxi-ir as /devices/virtual/rc/rc0 [ 10.493507] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0 [ 13.340352] PHY: gmac0-0:00 - Link is Up - 100/Full [ 865.534139] ehci_irq: highspeed device connect [ 865.800129] usb 3-1: new high-speed USB device number 2 using sunxi-ehci [ 865.984342] scsi0 : usb-storage 3-1:1.0 [ 866.981725] scsi 0:0:0:0: Direct-Access USB TO I DE/SATA Device 0009 PQ: 0 ANSI: 0 [ 866.986252] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled [ 866.987508] sd 0:0:0:0: [sda] Asking for cache data failed [ 866.987537] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 866.996170] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled [ 866.997360] sd 0:0:0:0: [sda] Asking for cache data failed [ 866.997387] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 866.997415] sd 0:0:0:0: [sda] Attached SCSI disk
itupun hardisk tersebut tidak bisa digunakan, mungkin kekurangan arus.
Check hardisk SATA ls -la /dev/sd*
$ ls -la /dev/sd* brw-rw---- 1 root disk 8, 0 Oct 24 20:40 /dev/sda
mount hardisk
Lokasi mount hardisk saya buat di /hd
mkdir /hd mount /dev/sda /hd
Tes kecepatan hardisk
$ dd if=/dev/zero of=/hd/tesaja bs=1G count=1 oflag=direct 1+0 records in 1+0 records out 1073741824 bytes (1.1 GB) copied, 67.3311 s, 15.9 MB/s